1. Siapkan Software
-
Install Inkscape (versi terbaru).
-
Tambahkan Gcodetools (biasanya sudah ada bawaan di Inkscape baru).
-
Software untuk jalankan CNC: Candle/GRBLControl.
2. Siapkan Gambar
-
Pilih foto wajah → kontras tinggi (hitam-putih lebih bagus).
-
Crop jadi ukuran sesuai kayu (misal 80mm x 80mm).
-
Simpan JPG/PNG.
3. Import ke Inkscape
-
Buka Inkscape.
-
File → Import→ pilih foto. -
Atur ukuran gambar (contoh: 80 x 80 mm sesuai kayu).
4. Ubah Foto jadi Vektor (Trace Bitmap)
-
Pilih gambar →
Path → Trace Bitmap. -
Mode:
-
Untuk ukiran garis sederhana → Brightness cutoff.
-
Untuk ukiran lebih detail → Multiple scans → Grayscale (6–8 scan).
-
-
Klik Apply.
-
Hapus foto asli, sisakan hasil trace (vector path).
5. Tambahkan Orientation Points
-
Extensions → Gcodetools → Orientation Points. -
Muncul titik koordinat (biru) di pojok kiri bawah.
-
Biarkan default (0,0,0) dan (X,0,0).
Ini jadi titik referensi CNC.
6. Tambahkan Tool Library
-
Extensions → Gcodetools → Tools Library. -
Pilih Cylindrical cutter → Apply.
-
Muncul kotak hijau.
-
diameter: 1 (cutter 1mm).
-
feed: 300 (kecepatan).
-
depth step: 0.3 (kedalaman per lintasan).
-
penetration feed: 100.
-
7. Konversi Path ke G-code
-
Pilih path hasil trace wajah.
-
Extensions → Gcodetools → Path to Gcode. -
Tab Preferences:
-
Directory: pilih folder yang benar-benar ada (misal
D:\GCODE). -
File:
wajah.ngc.
-
-
Klik Apply.
-
Inkscape menggambar garis toolpath tambahan.
-
File
.ngcotomatis tersimpan di folder.
8. Jalankan di CNC 3018 Pro
-
Buka Candle (GRBLControl).
-
Load file
wajah.ngc. -
Pasang kayu di meja CNC (80x80x20 mm).
-
Atur Z-zero di permukaan kayu.
-
Klik Run → mesin mulai mengukir sesuai foto.
✅ Hasil: wajah terukir di kayu dengan kedalaman sesuai setting (misal -2mm).
⚡ Catatan:
-
Kalau mau hasil 3D relief (bukan sekadar garis), harus bikin heightmap grayscale dulu → baru diubah ke G-code.
-
Kalau hanya line art (seperti vector hitam putih), cukup dengan langkah di atas.
Tidak ada komentar:
Posting Komentar